50mm Diamond Grinding Plugs | PCD Sikafloor Epoxy Flooring

50mm Diamond Grinding Plugs | PCD Sikafloor Epoxy FlooringPCD tapered plugs are used to remove coatings such as waterproofing membranes, thick epoxy resins, floor topping and a lot of thick glues. This was created to remove coatings from off the floor without creating heat build up thus reducing the chance of the coating becoming soft and gooey which makes it harder to remove. Two full round PCD for cutting action One PCD is the rider that keeps the cutters at the right height to prevent deep grooving or

Optional specialty liquid pigment can be added in the field

Sikafloor 158 W Fast Barrier (Moisture Barrier)

mixing small quantities at a time until the seepage or leak is stemmed

In Commercial Food premises where UV stability for optimum appearance is important

Pre-packaged embedding mortar

< 4 % pbw moisture content

Blasting Width 250 mm to cover large areas faster

Mechanically mix in an appropriately sized mortar mixer

Sika FerroGard 415 Patch CC is a zinc based discrete sacrificial anode placed in reinforced concrete structures which are corroding as a result of chloride ingress and / or carbonation

2x Ultrakote UVSeal 8L Drums

and even tough steel surfaces

Fast dry time