Hornady Custom Grade Full-Length Size Die 338 Lapua (.338) brand_-BARATEC

Hornady Custom Grade Full-Length Size Die 338 Lapua (.338) brand_-BARATECThe Hornady Custom Grade Full Length Size Die for 338 Lapua Magnum (. 338) resizes fired brass to SAAMI minimum specifications, keeping cases in spec for precise, repeatable loads in this long range, large bore cartridge. Hornady's Elliptical Expander sets this die apart from standard designs: it provides notably smoother neck sizing than a conventional ball expander, reducing friction and case neck stretch while its internal threading holds it

Upper speed lacing hooks allow for a quick change into driving shoes when travelling to and from a favourite hiking location

collar and cuff reinforcements and handy pockets

Compact and easy to carry in a cartridge bag or pocket

Constructed to be 100% waterproof

seat the square stainless steel recoil key in the slot and torque the T-15 Torx screws to 25 in/lb

220LS 34mm Quick Detach Low Silver Rings Return to Zero Guaranteed

so it is compatible with the Hornady Lock-N-Load AP and any other press accepting this thread pitch

Short leg is 30 inches

and the stainless steel pins are built to be reused indefinitely rather than replaced after a handful of tumbling cycles

Can be locked into a swivelled position using the attached lever

and the spring should be coated in a suitable high-pressure grease on assembly to cut noise and keep the cycle smooth

The Hoggs of Fife Field Sport Neoprene-Lined Wellington Boot in Field Green is a hardwearing rubber field boot built for wet ground