Screw-Pin Shackles Hot Dip Galvanized 1-1/8 thread_size_m30_2

Screw-Pin Shackles Hot Dip Galvanized 1-1/8 thread_size_m30_2Screw the pin into position by hand for quick installation and removal. They're for use in low vibration applications where the shackle remains stationary. Also known as anchor and bow shackles, the wide body provides room to attach multiple connectors. 316 stainless steel shackles have a thick coating for corrosion resistance. The shackles have a diameter of 1 1 8. Note: Capacities listed are for vertical lifting only. As the lift angle changes from

The screws have a thread of 3/4-10 and a length of 7-1/2

The elbows have a 4 thread and they are 45 degrees

The screws have a thread of 3/4-10 and a length of 18

they have a diameter of 1-1/4 and a length of 8-1/2

This hexagonal nut fit a threading of 1-8

Nuts have a load capacity of 3600 lbs

The screws have a thread of 1-3/8-6 and a length of 12

The screws have a thread of 1-1/8-7 and a length of 13

High-Strength Grade 80

This hexagonal bolt has a length of 12 with a threading of 3/4-10 [Partially Threaded]

This hexagonal bolt has a length of 8" with a threading of 5/8-11 [Partially Threaded]

This hexagonal nut fit a threading of 1-1/8-7