Bando XPZ1387 Metric V-Belts RPF6 (11mm wide)

Bando XPZ1387 Metric V-Belts RPF6 (11mm wide)Bando XPZ1387 In addition to belts manufactured to ARPM (Association for Rubber Products Manufacturers) standards, Bando produces belts to European standard DIN 7753 and ISO4184. These standards are based on the metric system of measure and have different cross section designations. The Narrow Wedge profile allows for higher speed ratios, shorter center distances, and more compact drives. They are direct replacements for belts on imported machinery

9 LB-FT Pull-Up Torque 22

01 IN Power Factor 70 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code Standard Pulley Shaft Indicator Standard Rodent Screen None Service Factor 1

Capacitor Required4MFD 370V

5 kW) Number of Poles 2 Frequency 60 Hz Rated speed 3550 rpm Slip 1

Catalog Number DRX18324T Enclosure XPFC Frame 182T Frame Material Iron Frequency 50

Break-Down Torque 617 LB-FT Pull-Up Torque 239 LB-FT Locked-Rotor Torque 332 LB-FT Starting Current 512 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S

Bando - C262 Continuous improvements in materials

125 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1785 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Drawings

08 % Rated voltage 460 V Rated current 9

Standard NEMA MG-1 Frequency 60 Hz Voltage 230/460 V Number of poles 4 Degree of Protection IP55 Synchronous speed 1800 rpm Output rating 1 HP Mounting F-1 Flange Without Terminal box¹ Left position Enclosure IC411 - TEFC Electric Motors

3 LB-FT Pull-Up Torque 3

Bando - 11M2300 Ideally suited for short center distances and small diameter pulleys