Bando P22L100 JA QD Timing Belt Pulley (JA) CAPACITORS MOTOR-RUNBando P22L100 JA The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
01 Ohms A Ph / 0 Ohms B Ph Temp
841 PLUS®
1 RPM 1625 FRAME 56YZ SER
36 IN Power Factor 67 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code Standard Pulley Shaft Indicator Standard Rodent Screen None Service Factor 1
UL approval UL1077 Trip curve C Number of poles 3 poles Rated current 1 A Maximum voltage 277/480 VAC Type Thermal-magnetic Attributes
06 % Rated voltage 230/460 V Rated current 8
3 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready IP Rating NONE KVA Code M Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3524M Mounting Arrangement F1 Number of Poles 4 Overall Length 13
94 % Rated voltage 230/460 V Rated current 46
lb Locked rotor torque 229 % Breakdown torque 290 % Locked rotor time 45s (cold) 25s (hot) Moment of inertia (J) 39
6 POLES 8 NUMBER SPEEDS 1 RPM 825 HERTZ 60 VOLTS PRIMARY 208-230 V VOLTS 208 VOLTS 2 230 FRME 56 SHAFT CODE Z STATOR DIAMETER 6
G XP Division Division I Agency Approvals UL CSA Ambient Temperature 40 °C Auxillary Box No Auxillary Box Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Constant Torque Speed Range 6-60 Current @ Voltage 124
Bando - 7PK1045 Trusted by the world's Top Automakers
