Bando P40-8M-85 HT QD Timing Belt Pulley (SD) ODP JM/JP TYPEBando P40 8M 85 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
25 IN Power Factor 70 Product Family General Purpose Pulley Face Code C-Face Rodent Screen None Service Factor 1
2 POLES 6 NUMBER SPEEDS 1 RPM 1180 HERTZ 60 VOLTS PRIMARY 460 VOLTS 460 FRME 213 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE CE OPPOSITE END BEARING 6208-J/C3 SHAFT END BEARING 6208-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1
This HPSTS belt achieves exceptionally higher power transmission - up to 2 times as high as conventional STS belts
For Additional Information Refer to "œEvergreen® VS Motors" Product Page
2 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code L Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 6 @ 18 AWG Motor Type 3528LC Mounting Arrangement F1 Number of Poles 4 Overall Length 13
Reference CLT32 Application Motor circuit breaker MPW Application complement 40 Breaking capacity 100 kA AC max supply voltage 500
Nominal Outside Length (mm)2180
442 A Rated torque 0
82 A LRC 4
03 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S
4 POLES 2 NUMBER SPEEDS 1 RPM 3450 RPM 2 2850 HERTZ 60 HERTZ 2 50 VOLTS PRIMARY 115/208-230 & 110/220 V VOLTS 115 VOLTS 2 208 VOLTS 3 230 VOLTS 4 110 VOLTS 5 220 FRME 56 SHAFT CODE C STATOR DIAMETER 6
Amperes 125 A LRC 8
