Bando BX48 Power King Cog BCW (UL) - THREE-PHASE CAPACITORS BANKSBando BX48 Studies have determined that using Bando Power King Cog and Power Ace Cog V belts can save substantial dollars on energy consumption. The precision molded raw edge cogged construction transfers power with much greater efficiency, allowing for smaller sheave sizes and increased power transmission capabilities. The bias cut cover stock provides lateral stability across the width of the belt while allowing axial flexibility. Stability is
Rise @ Rated Load 41° C Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S
lb Locked rotor torque 100 % Breakdown torque 270 % Locked rotor time 28s (cold) 16s (hot) Moment of inertia (J) 418 sq
Frame 284/6T Output 20 HP (15 kW) Number of Poles 6 Frequency 50 Hz Rated speed 970 rpm Slip 3
5 POLES 4 NUMBER SPEEDS 1 RPM 1740 HERTZ 60 VOLTS PRIMARY 575 VOLTS 575 FRME 145 SHAFT CODE JM MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE FD4 OPPOSITE END BEARING 6203-2Z-J/C3 SHAFT END BEARING 6207-2Z-J/C3 AMBIENT 40 SERVICE FACTOR 1
37 LB-FT Locked-Rotor Torque 21
Frame 588/9T Output 550 HP (400 kW) Number of Poles 4 Frequency 50 Hz Rated speed 1490 rpm Slip 0
Rated current 25 A Reference CWB Main contact 3 NO Control voltage 380V 50/60Hz Terminal type Screw Attributes
Nominal Outside Length (In)192
96 INV TYPE PWM CT 3 CC 010A Performance
0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready IP Rating NONE KVA Code G Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 8 AWG Motor Type 1256M Mounting Arrangement F1 Number of Poles 4 Overall Length 27
29 A Rated torque 4
249 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1785 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Drawings
