Drill Bit Pack Sample Product

Drill Bit Pack Sample ProductIf you are new to Hovr, you will need to grab a bit pack depending on your installation method. This pack includes: 17 64 HSS Steel Drill Bit 5 16 #18 HSS H3 BTM Tap Bit If you are using set screws, you will need a 17 64 HSS Steel Drill Bit to drill the pilot holes for the set screws. The 5 16 #18 HSS H3 BTM Tap Bit will create the threads needed for the hole.

First time ordering

Sharp edge of self-tapping tip drills a cleaner pilot hole

If you purchased a Hovr Bracket System from one of our authorized distributors or you just need more screws

Black Oxide

first we need a Cobalt 17/64 inch bit (or you can use even a 7/64 inch bit)

We at Hovr Strong Solutions prefer to use 5/16 - #18 set screws

Made from 305 stainless steel

we prefer a Taper Tap Bit 5/16 Inch #18

then you will want to order our Installation Hardware Pack

In order to lock the bracket system into place

17/64 HSS Steel Drill Bit

such as ¼” - 20 or # 10 – 24