Fasco D264 OEM Replacement Motor, 1/8 HP, 1 Ph, 60 Hz, 230 V, 1550 RPM, 3 Speed, 42 Frame, OAO CSW30 SERIES (NEMA4/IP65)

Fasco D264 OEM Replacement Motor, 1/8 HP, 1 Ph, 60 Hz, 230 V, 1550 RPM, 3 Speed, 42 Frame, OAO CSW30 SERIES (NEMA4/IP65)OEM Direct Replacement Motor 5" Diameter 42 Frame Permanent Split Capacitor (PSC); Capacitor Required: 5 Mfd 370 Volts (Supplied with Motor) Thermally Protected Enclosed Shaft End Frame and Shell, Open Lead End End Frame, Air Over Class B Insulation, 40C Ambient Sleeve Bearing 1 2" Diameter Shaft with Flat 31" Leads with Flag Terminal Hex Mounting Hub Shaft End and Lead End Additional Information Thermal ProtectionAutomatic Speed1550 rpm Current1. 1 A

36 LB-FT Locked-Rotor Torque 8

FDEM3711T-5 SPEC

6 POLES 4 NUMBER SPEEDS 1 RPM 1725 HERTZ 60 VOLTS PRIMARY 115/230 VOLTS 115 VOLTS 2 230 FRME 56 STATOR DIAMETER 6

60 NEMA-NOM-EFF 68 RATING 40C AMB-CONT DE 6203 ENCL TEFC Parts

5x(Code G) No load current 58

Amperes 806 A LRC 7

Catalog Number VM3534-5 Enclosure TEFC Frame 56C Frame Material Steel Frequency 60

0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code F Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 12 @ 10 AWG Motor Type 3956M Mounting Arrangement F1 Number of Poles 4 Overall Length 23

4 POLES 4 NUMBER SPEEDS 1 RPM 1725 HERTZ 60 VOLTS PRIMARY 115/230 V VOLTS 115 VOLTS 2 230 FRME 56 STATOR DIAMETER 5

lb Locked rotor torque 229 % Breakdown torque 240 % Locked rotor time 14s (cold) 8s (hot) Moment of inertia (J) 77

Catalog Number CEM3546T-G Enclosure TEFC Frame 143TC Frame Material Steel Frequency 60

11 % Rated voltage 208 V Rated current 185 A L