Bando 100-S2M-166 S2M Timing Belt Switching

Bando 100-S2M-166 S2M Timing Belt SwitchingBando 100 S2M 166 Unique modified curvilinear tooth form enables the STS belt to transmit greater loads than like sized drives having the standard high torque tooth profile. Smoother tooth engagement and direct contact of belt tooth top with the pulley grooves enables the belt to run quietly even at high speeds. As the tooth meshes with the pulley grooves, the cord lay forms an almost true circle, minimizing the cantilever effect on the cords,

Catalog Number CSSWDM3541 Enclosure TENV Frame 56C Frame Material Stainless Steel Frequency 60

Load 76° C Start Configuration DOL Break-Down Torque 18 LB-FT Pull-Up Torque 11 LB-FT Locked-Rotor Torque 16 LB-FT Starting Current 33 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S

0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code K Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 6 @ 8 AWG Motor Type 1272M Mounting Arrangement F1 Number of Poles 4 8 Overall Length 30

9 VOLTS 460 AMP 24/18 RPM 1760/1160 FRAME 286T SER

Frame 364/5HP Output 75 HP (55 kW) Number of Poles 4 Frequency 50 Hz Rated speed 1475 rpm Slip 1

06F552X181Z1 FRAME 182TC VOLTS 230/460 MAG CUR 4

Bando - 525-3M-9 Synchro-Link® HT (High Torque Synchronous) belts' curvilinear tooth design improves stress distribution to provide high horsepower ratings over a wide speed range and high torque transmission at low speeds

Amperes 233 A LRC 7

VSSWDM3457 SPEC

43 LOCKED ROTOR TORQUE UOM OZFT LOCKED ROTOR AMPS 11

Ribs/Teeth/Angle137

35E012X086G3 HP