Metabo HPT Finish Staples sand paper driver

Metabo HPT Finish Staples sand paper driverTYPE: 18 Gauge Electro Galvanized Finish Staples APPLICATION: Staples provides excellent holding power in most sheathing, pallets and crates COUNT: 1,000 per box LENGTH: 1 4 In. x 5 8 In. TREATMENT: Electro Galvanized, coats the staples with a layer of zinc, for greater rust resistance COMPATIBILITY: Compatible with the Metabo HPT N3804AB3

Height: 9" Length: 10-1/2" Width: 2"

and a low-profile design that lays completely flat to reach underneath beds and other furniture

Opposing shear angles eliminate chipping and tear out on top and bottom surfaces

CWC Pallet Netting - Hand Grade

The ultimate concrete prep tool for hard-to-prep surfaces

Surge 10 Gallon Mid-Size Extractor Solution Capacity Recovery Capacity Vac Motor CFM/Waterlift PSI 10 gal 8 gal (1) 3-Stage 97/101

Holds sanding screens and abrasive discs firmly in place

with deep scrubbing power on uneven surfaces

(ship freight only)

Encapsulation cleaning on carpet

1-1/4-Inch and 1-1/2-Inch staple lengths with Caps

Maximum Pressure: 4500 psi