3.5 lbs cross peen hammer

3.5 lbs cross peen hammerThis Cross peen hammer is made from an old forklift tine and a rough cut piece of ash, which is harvested 15 minutes from my shop. Total weight with handle is 1. 72kgs 3. 79lbs. handle length is 15". Head from peen to face is about 6". Both handle and head has been treated with linseed oil. The hammer in the picture is the one you will receive.

This steel pin is handcrafted by me

Total weight with handle is 524 grams/ 1

It is made from a used industrial garage door spring that has lived out its usable life as a spring

Introducing our versatile and stylish leather scribe

3 3/4" (95mm) diameter

The result is a handy tool that can be used for leatherwork

The scribe starts as a 8 inch long piece of 1/4 inch round steel

One side has the 20 as the main number and the other side has the 1 as the main number

Can be personalization with your name laser engrave on it

Please leave a message during checkout of the name you would like engraved on it

in my blacksmith shop named Red Maple Forge

and lightly coated with beeswax to prevent rusting