Bando TL84-S8M-60 STS TL Timing Belt Pulley (3020) HVACBando TL84 S8M 60 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
3 POLES 4 NUMBER SPEEDS 1 RPM 1725 HERTZ 60 VOLTS PRIMARY 115/230 V VOLTS 115 VOLTS 2 230 FRME 56 STATOR DIAMETER 5
35-0001552 FRAME 145TC HP 1 NOM
Standard NEMA MG-1 Frequency 60 Hz Voltage 200/400 V Number of poles 2 Synchronous speed 3600 rpm Output rating 20 HP Mounting F-1 Flange Without Terminal box¹ Left position Enclosure IC01 - ODP Electric Motors
Reference RW27 Number of poles 3 poles Mounting type Direct Contactor model CWB9-38 Current range 0
A PH Motor Type 3524LC Mounting Arrangement F1 Number of Poles 2 Overall Length 12
750 0 Line Amps 3
UL approval UL1077 Trip curve B Number of poles 1 pole Rated current 1
8 RPM 1760 HZ 60 SER
Frame 254/6JP Output 20 HP (15 kW) Number of Poles 2 Frequency 60 Hz Rated speed 3515 rpm Slip 2
Frame 364/5JM Output 40 HP (30 kW) Number of Poles 6 Frequency 60 Hz Rated speed 1183 rpm Slip 1
Series EDP11 Panel type VFD Horsepower (HP) 40 HP Enclosure type Wall mount Thermal Managment Enclosure heater General enclosure options Lightning Arrestor Main voltage 230 V Control Voltage 120 V Frequency 60 Hz SCCR rating 5 kAIC Disconnect switch type Circuit Breaker rotary handle disconnect Bypass type None Control power transformer 100 VA - Open Reactor/Filter None Communication None Control options Start Pushbutton
EM3607 SPEC
