MultiControl Pulsation Controller pump

MultiControl Pulsation Controller pumpControls up to 3 banks of Pulsators with adjustable Rate and Ratio. Multiple banks lowers the load on the Dairy vacuum supply compared to a single drive system. Fault protected 2x2 outputs shut off during overload, over under voltage and wiring shorts to prevent damage. Three tri colour LEDs show the status of each bank. Can be configured to automatically start on power up or from an external closed contact. Requires and external 12V or 24V power

Easily setup for rate/ratio and vacuum characteristics of a plant

Comfortable shoulder strap – Padded

Batteries: two ‘AA’ alkaline or NiCd/NiMH rechargeable cells

🇬🇧 / 🇺🇸 - DairyTest X User Manual - English

When plugged into a PC USB port the unit appears as a standard USB FlashDrive so reports can be easily transferred for printing and archiving

Kit includes everything needed

It is specifically designed for farmers or milkhands to perform a fast

If only Stall 26 is saved that will be used

The displayed reading is not affected by the drop

Adjustable inject time (1s to 7s)

Pulsation 'zero values' fixed Previously for some pulsation waveforms the waveform would appear correct but all parameter values would display as zero

Bank outputs protected against shorts (LED shows red)