WEG SSW900A0010T5E2B SOFT-STARTER SSW900A0010T5E2B Hazardous Location T ShaftSoft starters are drives dedicated to the smooth acceleration and deceleration of three phase electric motors, by controlling the voltage applied to the motor. With proper adjustment of the variables, the torque produced is adjusted to the load requirement, thus ensuring that the requested current is the minimum required for starting. The SSW900 is a soft starter with three phase motor control, built in by pass and torque control. Intended to drive
Standard NEMA MG-1 Frequency 60 Hz Voltage 575 V Number of poles 8 Degree of Protection IP55 Synchronous speed 900 rpm Output rating 60 HP Mounting F-1 Flange Without Terminal box¹ Left position Enclosure IC411 - TEFC Electric Motors
Start Type Direct Single-phase Maximum Power Rating Not applicable Rated operational voltage Ue<=600V Control voltage 120V50/60HZ Control devices A-On-Off Button Degree of protection TYPE1 Starters Complements Does Not Contain Rated current (AC-3) 18A (CWB18) Overload relay 10-15 A (RW27) Measuring tool and accessories Not Applicable Button type Unspecified Button color Not Specified Connection Type Not Applicable Downloads
70 % Rated voltage 415 V Rated current 133 A L
47 BREAKDOWN TORQUE UOM OZFT LOCKED ROTOR TORQUE 14
9 POLES 4 NUMBER SPEEDS 1 RPM 1785 HERTZ 60 VOLTS PRIMARY 460 VOLTS 460 FRME 444 SHAFT CODE U MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE JDE OPPOSITE END BEARING 65BC03JPP3 SHAFT END BEARING 90BC03JPP3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1
50 % Rated voltage 230/460 V Rated current 7
7x(Code G) No load current 52
4x(Code K) No load current 9
67 % Rated voltage 230/460 V Rated current 48
weight³ 4238 lb Efficiency
40 A Rated torque 26
15 STARTCAPMFD N\A SHIPPING WEIGHT 410 BREAKDOWN TORQUE 249 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 197 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER F LOCKED ROTOR AMPS 142
