Bando 334L100G L Timing Belt Open-End RubberBando 334L100G The extra durable, highly flexible neoprene backing provides excellent abrasion and wear resistance especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt, and moisture. Continuous, helically wound high strength fiberglass tensile cords guarantee dimensional stability to eliminate take up adjustments. Heavy torque loads wont fatigue this super strong cord.
Oil and heat resistant bias cut envelope protects the belts inner components against dirt
37K446L863G1 HP 7
0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals CSA EEV CCSAUSEEV CCSA US Ambient Temperature 40 °C Auxillary Box No Auxillary Box Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Current @ Voltage 70
BryantHH12ZB160
Bando - P14XL037A The type of pulley used on a Synchro-Link® drive depends on a number of factors
875 IN Shaft Extension Location Pulley End Shaft Ground Indicator Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1780 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Wye Start - Delta Run Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings
15 STARTCAPMFD N\A SHIPPING WEIGHT 105 BREAKDOWN TORQUE 272 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 173 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER G LOCKED ROTOR AMPS 253
lb Locked rotor torque 280 % Breakdown torque 300 % Locked rotor time 12s (cold) 7s (hot) Moment of inertia (J) 145 sq
5 a Heater Indicator No Heater Insulation Class H Inverter Code Inverter Ready IP Rating NONE KVA Code K Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Termination Flying Leads Motor Type 0630M Mounting Arrangement F1 Number of Poles 6 Overall Length 15
6 a Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty IP Rating IP55 KVA Code H Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 5400 rpm Motor Lead Termination Flying Leads Motor Type 0726M Mounting Arrangement F1 Number of Poles 2 Overall Length 20
96 BREAKDOWN TORQUE UOM OZFT LOCKED ROTOR TORQUE 78
Standard NEMA MG-1 Frequency 60//50 Hz Voltage 208-230/460//380 V Number of poles 4 Degree of Protection IP55 Synchronous speed 1800 rpm Output rating 40 HP Mounting F-2 Flange Without Terminal box¹ Right position Enclosure IC410 - TEAO
